How To Reset AT&T Router? (Reset Or Restart AT&T Gateway)

Are you having internet issues and wondering how to reset your AT&T router?

Before resetting your router, it’s wise to take into account a few key factors. Once you initiate a reset, there’s no reversing the process as it erases all customized settings and data.

To improve your router’s performance, you can reboot it instead and you will also keep the configurations of your WiFi network.

Your AT&T router is just like any other electronic device – over time, it can start to malfunction and might need a reset.

This will optimize your settings and remove any connectivity issues which keeps your router running at its best.

If you use the internet for gaming or streaming, a recurring loss of connection can be frustrating.

While it may not be entirely avoidable, addressing and resolving intermittent service disruptions can be a simple and speedy process.

Continue reading to learn how you can reset your AT&T router.

Common Connectivity Issues That Can Be Solved By Resetting The Router

If your AT&T internet connection is not meeting your expectations and the speed you’re paying for, it is important to investigate the cause of the connectivity disruption.

The following are some of the most frequent factors that contribute to an AT&T internet outage:

• Malfunctioning router.
• Insufficient equipment or speed capabilities.
• Network problems or hacking incidents.
• Adverse weather conditions.
• Congestion or outages on the ISP’s network.

Methods For Resetting Your AT&T Router

There are two methods for resetting your AT&T router. They include:

1. Using the Web Interface

The simplest method for resetting your router is through the web interface, which can be accessed from any computer or smartphone connected to the router. The default IP gateway, username, and password required to access the web interface are usually indicated on the router.

Below are the steps you need to take.

• Open a web browser on any device connected to the router you wish to reset.
• Enter the default IP address, which is usually either 192.168.1.254 or 192.168.0.1. You can also find it on the back of the router.
• Log in by entering the username and password. In most cases, you can leave the username field blank and enter “attadmin” in the password field.
• Click on “Settings” in the top menu and select “Diagnostics.”
• Locate the “Reset” option.
• To perform a factory reset, click on “Reset to Factory Default State.”

Once you reset your router, the lights on the front will turn off and then turn back on, indicating that the router has been successfully reset and is now ready for use. The blinking patterns may differ based on the router model, but they usually signify that the router has been reset.

If you’re having difficulty accessing the web interface or find this method confusing, you can attempt the following option.

2. Using the Reset Button

When accessing the web interface proves difficult, resetting your AT&T router using its physical reset button is a simpler alternative. The reset button can typically be found on the back or bottom of most routers, and all you need to do is locate it and press it.

You can do this by following these steps.

• Power on the router if it isn’t already.
• Find a small button that is labeled “Reset”.
• Push the button down. If it’s not protruding, employ a paperclip or toothpick to gain access to it.
• Hold for a minimum of 9 to 10 seconds.
• The router will now power off and then back on.

Performing this action will restore your router to its original settings. As a sign of completion, the router will restart, and its lights will blink in a particular sequence once more.

Frequently Asked Questions

What happens when I reset my AT&T router?

Executing a reset operation will bring your router back to its default state. This process will eliminate any personalized configurations such as static IP addresses, individualized passwords, customized DNS, and Wi-Fi settings.

Where is the reset button on my AT&T WiFi?

On most AT&T routers, the reset button is positioned on the rear side, beneath the power input cable, alongside all the connected wires. This button is labeled “Reset” and appears in red.

Will Resetting My AT&T Router Increase My Internet Speed?

Resetting your AT&T router means that you are refreshing its settings and clearing its memory.

This process can help solve issues like slow internet speed as it allows you to reboot your router from scratch where it will perform at optimal levels. However, it will not be faster than the maximum speed it is designed for.

What’s The Difference Between Resetting and Restarting a Router?

Restarting a router means turning it off briefly and then turning it back on, while connected to a power source.

To go a step further, you can also disconnect the power source and other cables, but this process is called a power cycle.

On the other hand, resetting your router involves deleting the memory and restoring the router to its original configuration.

This process will delete any saved data and settings, meaning you have to customize your router again after the process is complete. It is also known as factory reset or hard reset.

How often should you reset your router?

Resetting routers daily is not necessary, however, it’s advisable to reboot them every few months to eliminate the cache and ensure your internet connection operates seamlessly.

Final Words

Hopefully, this brief article has given insight into a couple of approaches to resetting your AT&T router.

You should also now be aware of the differences between a reset and a reboot. A reset will restore the device to its default settings, while a reboot simply restarts the device, maintaining existing settings.

Should you encounter problems with your AT&T router or notice that its performance is below par, implementing the above steps could help to resolve the issue.

However, if this does not provide a solution, you should seek assistance from your internet service provider.