How to Install TWRP Without a Computer « Android :: Gadget Hacks

TWRP is the premiere custom recovery for Android because of how many devices it supports and how simple it is to use. But installing it in the first place hasn’t always been the easiest thing to do — until now. With the help of a Magisk module, you can finally use one Android device to flash TWRP on another.

Google removed Android’s native ability to send ADB and Fastboot commands to other devices in an earlier version, but this mod brings that functionality back. Developers osm0sis and Surge1223 are the ones who made the magic happen, so big props to them for their work. The initial setup is the longest part of this whole thing, but once that’s done, it’s easy to maintain in the future.

  • One Android device that was rooted with Magisk (host phone)
  • Another Android device with an unlockable bootloader (target phone)
  • USB data cable or OTG adapter for connecting the devices
  • The main rooted device should have USB OTG support

You will need two Android devices for this to work, and one should already be rooted. The already-rooted device takes the place of the computer in this instance.

Step 1: Install ADB & Fastboot for Android

On the Android device with root access, open Magisk Manager, tap the menu on the left, then go to “Downloads.” Tap the search icon, then type in “adb” to locate the ADB & Fastboot for Android NDK module. Tap the download arrow, hit “Install,” then tap the “Reboot” button to activate the module.

How to Install TWRP Without a ComputerHow to Install TWRP Without a ComputerHow to Install TWRP Without a Computer

Step 2: Download TWRP for Your Device

Now you need to grab the TWRP image file for the device you want to install the custom recovery onto. Grab your TWRP image from the link below and save it to the “Download” folder on both devices. Also, rename the file to “twrp” to make things easier for later on in the guide.

  • Download Official TWRP Images

Step 3: Install the Termux App

To make use of the Magisk module you installed from Step 1, you’ll need to have a terminal app. Termux is one of the best such apps, so hit up the link below to get it installed on your already-rooted device.

  • Play Store Link: Termux (free)

How to Install TWRP Without a Computer

Step 4: Enable USB Debugging

On the target phone, go to Settings –> About Phone and tap “Build Number” 7 times quickly to activate Developer Options. Once done, head to Developer Options either from Settings –> System –> Advanced or from the very bottom of your Settings app. Finally, enable the “USB Debugging” option.

  • More Info: How to Enable Developer Options & USB Debugging

How to Install TWRP Without a ComputerHow to Install TWRP Without a Computer

Step 5: Connect the 2 Android Devices

If both phones were made in the last few years, you’ll just need a standard USB C cable to connect them. One with the modern, reversible connector on both sides. But if one or both of the phones has a micro USB port, you can find adapters on Amazon using the links below.

  • Buy a USB Type-C OTG adapter from Amazon (from $3.50)
  • Buy a Micro USB OTG adapter from Amazon (from $4.20)
  • Buy a USB A to USB C cable from Amazon (from $5.99)

How to Install TWRP Without a Computer

Step 6: Allow USB Debugging Permission

Once the two Android devices are connected, the target phone should show a new popup right away. Remove and reconnect the USB cable for the secondary device if this doesn’t happen to try again. Now, tap “Always allow from this computer,” followed by “OK” to confirm the choice.

How to Install TWRP Without a ComputerHow to Install TWRP Without a Computer

Step 7: Grant Root Access

On the rooted device, open the Termux app, type the following command, then press enter.

su

This will trigger a superuser request from Magisk, which is required when executing higher-level system commands. Tap “Grant” when prompted, then you’re all set here. You’ll need to run the “su” command before sending ADB or Fastboot commands each time, but you won’t be required to grant the superuser request again.

How to Install TWRP Without a ComputerHow to Install TWRP Without a ComputerHow to Install TWRP Without a Computer

Step 8: Verify Your Device Connection

Just because the two devices are connected to one another doesn’t mean they are actually communicating correctly. To check this, type the following command on the rooted device through Termux, then press enter.

adb devices

The above command will check any connected devices that can communicate via the ADB interface. If everything worked as intended, you should see a device ID under the “List of devices attached” line.

How to Install TWRP Without a ComputerHow to Install TWRP Without a Computer

Step 9: Boot into Fastboot Mode

Before you can run any Fastboot commands, you’ll need to boot your secondary device into a special mode for this very thing. On the rooted device with Termux, type the following command, then press enter.

adb reboot bootloader

This will send the secondary device into its native bootloader menu, which is also known as “Fastboot Mode.”

Step 10: Locate the TWRP File

At this point, you’ll need to redirect Termux so that it can locate the twrp.img file you downloaded from Step 2. Using the same rooted device terminal, type the following command, then press enter.

cd /sdcard/Download

As mentioned, this will redirect the location of the terminal window to the “Download” folder on your rooted device. This is the specific location where the twrp.img file is, so you need to make sure you enter the command exactly as it appears.

Step 11: Check Your Partition Layout

Now it’s time to send over the twrp.img file to the secondary device so you can get TWRP installed onto it. But the instructions are different depending on whether or not the target phone supports Android 7.0’s A/B partition layout.

So first, if you’re not sure whether the phone you want to install TWRP on has A/B partitions, install Treble Check from the Play Store. Open the app and it will say either “Unsupported” or “Supported” in the Seamless System Updates section. If your phone is supported, you have A/B partitions and should follow the corresponding instructions in the next step.

  • More Info: How to See if Your Phone Has A/B Partitions

Step 12: Install TWRP

If you have an A/B partition target device, open the Termux app on the host device and type the following command, then press enter.

fastboot boot twrp.img

How to Install TWRP Without a ComputerHow to Install TWRP Without a Computer

This will temporarily boot TWRP onto the secondary device; however, you’ll still need to run the permanent installer after that. If you don’t do this, TWRP will disappear after you reboot your device.

So tap “Install,” browse to the Download folder, then press the “Install Image” button. Tap the twrp.img file, select “Install Recovery Ramdisk,” then swipe the slider to begin. Once the process is finished, press the home button, go to “Reboot,” then “Recovery,” where you’ll be greeted by the permanent version of TWRP!

How to Install TWRP Without a ComputerHow to Install TWRP Without a ComputerHow to Install TWRP Without a ComputerDepending on your version of TWRP, your options might differ slightly when installing an image file. Just look for something related to “Install Image” or “Recovery Ramdisk” and install it using that option.

If the target phone does not have A/B partitions, open Termux on the rooted device and type the following command, then press enter.

fastboot flash recovery twrp.img

This command will permanently install TWRP onto your device without any extra work on your part due to how devices with an “A-only” partition layout work. The final thing you need to do is type the following command, then press enter.

fastboot reboot recovery

At this point, your secondary device should now reboot to the TWRP main menu automatically. You can safely remove the USB cable or OTG adapter now. You’ve successfully installed TWRP and can do anything you want using the popular custom recovery without being tied to a computer.

Note: If your device doesn’t respond to the Fastboot recovery command, you’ll have to manually boot into recovery mode. It involves holding a button combination when powering on the device to access the bootloader menu. You then navigate the menu to locate the “Recovery” option. Accessing the recovery option will boot you right into the TWRP main menu. Visit the link below for more on that:

  • More Info: This Is the Fastest Way to Get into Recovery Mode on Android

Don’t Miss: How to Use Magisk to Root Your Phone Without a Computer

Hot Deal: Set up a secure second phone number and keep your real contact details hidden with a yearly subscription to Hushed Private Phone Line for Android/iOS, 83%–91% off. It’s a perfect second-line solution for making calls and sending texts related to work, dating, Craigslist sales, and other scenarios where you wouldn’t want to give out your primary phone number.

Cover image and screenshots by Stephen Perkins/Gadget Hacks

Not working after flash recovery enter command adb reboot recovery command enter invalid command like error disconnect manual going its gone please help

Hi, it should have been fastboot reboot recovery as the command. Not sure why it said ADB before, but it’s fixed! Some devices will respond to this Fastboot recovery command to save you an extra step.

If your device doesn’t respond to this command, you need to manually boot the device into recovery mode. There are a variety of different ways to do this, depending on your device manufacturer. The most universal method is to use the button combination when powering on to access the bootloader menu. You then navigate the menu to the “Recovery” option to boot into TWRP from there.

You can find more on that by visiting the link below:

  • More Info: This Is the Fastest Way to Get into Recovery Mode on Android

I think it’s great the development of this type of flashing props to the dev

Source: android.gadgethacks.com